The Zmodo Camera protects your residence with its smart safety system, which is designed to take protection to another class. It has always been on the top as it provides total security to your treasured ones. With multiple advanced elements, users sometimes confront a very ordinary zmodo camera blinking green issue.
Generally, the green light represents that the device is in the setup mode or is ready to get configured. The issue occurs when the green light is flashing for a longer time than expected. Hence, it is mandated to resolve the green light timely for optimal camera performance. In this blog post, we convey whole knowledge concerning the same with adequate strategies to fix the issue.
Why My Zmodo Camera is Blinking Green?
Regardless, there are many other aspects also which are accountable for the same. They are mentioned below in this section:
- Unstable internet connection
- Insufficient power supply
- Outdated firmware
- Wrong Configuration
- ISP issues
- Technical Bugs & glitches
Quick Fixes For Zmodo Camera Blinking Green Light
Moreover, you can eradicate the green light issue by walking across some easy and uncomplicated fixes. In this province, we will analyze the appropriate troubleshooting strategies that will assist you in determining this problem. So, let’s have a close look:
Stable Internet Connection
When the camera is linked to the wireless connection and there are network problems, then check that the router and the modem are attached appropriately. Also, move the router and them closer to each other.
Ensure Sufficient Power Supply
There should be an acceptable power source for steady camera performance. Check that the power authorities are not defective or burnt to control the zmodo camera blinking green light problem.
Update the Camera’s Firmware
If the Zmodo device is outdated then this may become one of the initial causes. To do so, log in to your smart camera first, then inspect and update the camera firmware by visiting Advanced Settings.
Restart the device
To fix the internal technical bugs & glitches, restart your Zmodo camera. To do so, unplug the adaptor, unmount the device, and then remove the batteries. Now, stay for at least a few seconds and then reinsert them.
Reconfigure the camera
Sometimes, the camera starts blinking a green light as it is not configured appropriately. So, check that the device is configured properly, and if not then, reconfigure the camera from fresh.
Disable VPN/Firewall
If you are running security software like VPN, Firewall, antivirus, etc., then disable them for some period. Initially, fix the issues with which you are moving, and re-enable the security software later.
Contact ISP Authorities
If you’re encountering persistent network problems such as network drop-offs or no network access, it is the best option to get in contact with your ISP to check with the internet services in your location.
Factory reset the Camera
If still my zmodo camera is blinking green light issue continues, you can also try performing a master reset on your smart camera. This redirects the smart camera to its default state, demanding you to reconfigure the appliance from the start.
Button Line
Last but not least, the above-elaborated details concerning the zmodo camera blinking green light assist you in comprehending the causes behind this issue. Also, you find relevant and effective troubleshooting techniques to determine the above-discussed error. If you are still seeking more help regarding the Zmodo Camera, get in touch with us freely!